skip to main content
Tedd Engineering Choose MezzLight to Give Their Business a Lift

Tedd Engineering Choose MezzLight to Give Their Business a Lift

tedd engineering

Specialist engineering firm Tedd Engineering chose a Penny Hydraulics Goods Lift to help their business to continue growing.

Derbyshire based engineering firm Tedd Engineering recently expanded into a new unit due to the sustained success of its bespoke advanced control units. Goods lift specialists Penny Hydraulics were approached to design, manufacture and install a lifting solution to move components between floor level and their mezzanine where many of the products are made.

A MezzLight was specified as the ideal solution for Tedd Engineering’s moving and handling problem. With a safe working load of 250kg providing more than enough lifting capacity for the task at hand, its interlocked door system and hold-to-run operation the MezzLight was a safe and efficient solution for the engineering company.

Goods Lifts Designed and Manufactured in the UK

Penny Hydraulics design and manufacture its range of goods lifts at its UK base in Derbyshire. This enables us to control the manufacturing process tightly which speeds up production time and allows us to be flexible and work with customers project programmes.

Installed By Penny Hydraulics Using Our Own Equipment

Penny Hydraulics has its own installation team that is experienced in fitting Goods Lifts in a variety of settings up and down the country. We do not subcontract staff and we use our own equipment (including our own range of vehicle-mounted cranes) meaning that we do not hide any costs in your installation quote.

About Tedd Engineering

From their headquarters in the Midlands, Tedd Engineering design and manufacture bespoke control solutions for clients across the UK, Europe and USA. Established for over twenty years, their award-winning team remains at the cutting edge of technological advances, enabling them to respond quickly and efficiently to the evolving needs of our clients. At Tedd Engineering, they have the expertise and experience to translate your design requirement into an electronic control solution that meets your precise requirements.

Find out more on the Tedd Engineering website

About Penny Hydraulics Goods Lifts

Penny Hydraulics goods lift range is manufactured in the UK allowing both standard and bespoke designs to be installed within short lead times. Our comprehensive project management helps you from site assessment through the design, manufacture and installation phases of the project, including whole life maintenance.

Find out more in our Goods Lift Brochure

Subscribe to our mailing list