skip to main content

Penny Hydraulics offer a full and comprehensive fitting service at their purpose built facility in Clowne, Derbyshire for all vehicle mounted lifting equipment.

Not only does this ensure the correct and safe installation of your lifting equipment, it minimises vehicle movement and downtime.

Alternatively, vehicle mounted cranes and hydraulic loading platforms may be dispatched to a competent installer of your choice if this is preferable.

For all goods liftschandelier winch systems and nuclear mechanical handling equipment, Penny Hydraulics specialist installation engineers install the equipment at our customers sites throughout the UK.

All our installation engineers carry a CSCS qualification, the leading skills certification scheme within the UK construction industry.

Choosing an installer

It would be expected that an installer would have access to the chassis manufacturers’ Body Builder Guide Lines and installation instructions from the crane manufacturer. 

The installer would be expected to work within a quality procedure, use coded welders and traceable materials. The finished Loader Crane Installation must be subject to a thorough examination and test for which calibration weights are required, a test area and a ‘competent person’ to conduct the examination and test. 

The competent person may be an in-house employee or an experienced employee of a loader crane supplier; or an insurance company inspection engineer etc., but in all cases should be sufficiently impartial to allow objective decisions to be made. 

An incorrectly mounted loader crane is not only unsafe but can also render the vehicle unsafe. Life expectancy of the crane can be greatly reduced if incorrectly calibrated.


Penny Hydraulics enjoys ownership of purpose built premises housing all functions of a fully integrated company. The factory has designated fitting areas with qualified, experienced fitters waiting to install your equipment to the highest standard. 

When fitting a mounting frame to a vehicle, weight is a premium and so our AutoCad package allows us to tailor-build where applicable and ensure that material weight is kept to a minimum, whilst ensuring the strength and stability of the lorry loader is maintained. 

Penny Hydraulics also offers nationwide on-site installation. As well as a fleet of service vans, our experienced fitting engineers are fully trained to install equipment on your site within the UK.

Penny Hydraulics are proud to be approved converters for Vehicle Mounted Lifting Equipment for VW, Renault, Nissan and Ford.

VW Approved Converter Renault Approved Converter Nissan Approved Converter Ford Approved Converter

Subscribe to our mailing list