Cranes
for light commercial vehicles Penny Hydraulics vehicle-mounted
cranes and platform lifts are loads better for safe, reliable and efficient handling
and loading of all commercial vehicles. Cranes include the popular Penny Hydraulics
Swing Lift range for loads up to 2000kg while platform lifts include the Penny
Hydraulics Easyloader Tail Lift, Penny Hydraulics Side Lift, Penny Hydraulics
Step Lift, Penny Hydraulics side mounted Load Lift and rear mounted Load Lift
for loads up to 550kg, Penny Hydraulics Single Wheel Lift and the Penny Hydraulics
Grid Lift. A range of electrical and hydraulic winches from Warn, Superwinch &
Rule are available to provide additional load handling capabilities. | | Vehicle
Mounted Cranes |  | The
Swing Lift KJ250/1
has been specially designed
to be fitted inside panel vans. This one metre knuckle-joint crane offers complete
flexibility, allowing loads to be positioned accurately anywhere within its one
metre radius. Available with 1 or 1.5 metre radius. | The
Swing Lift KJ250/2
The new KJ250/2 is a two metre
knuckle-joint crane offering a complete handling solution, combining simplicity,
reliability and proven durability. It provides a safe, efficient and cost-effective
means of handling loads for all types of vehicle. |
Miniloader
250
A lightweight, de-mountable, 250kg capacity
electric crane for pick-ups, drop sides, flat beds and vans. | Miniloader
500
Penny Hydraulics Swing Lift ML500 is a medium
duty electric crane for pick-ups, drop sides, flat beds and vans. |
Foldaway
F500
The Penny Hydraulics Swing
Lift F500 is a compact, 500kg capacity electric crane for pick-ups, drop sides
and flat beds. | SwingLift
FV500
The new SwingLift FV500 has hydraulic slew,
boom raise, lower and extension for controlled, precise and safe handling. Its
500kg capacity hoist allows vertical below-ground handling making it the ideal
solution for local authorities, highways and utilities. | SwingLift
FV1200
The new SwingLift FV1200 is a fully hydraulic
1200kg capacity vehicle mounted crane. With a boom reach of 4.3 metres it is designed
for a wide range of load handling applications including service, engineering
and deliveries. Its compact design, robust construction and light weight ensure
the FV1200 can be installed on a wide range of 3.5t+ commercial vehicles to provide
reliable and flexible load handling capabilities. | V
Range
Three larger hydraulic
cranes combining value for money with unique safety features including load limiting
devices, load limit indicator and remote control operation all as standard. |
GridLifts
The
new GridLifts are designed for installation on highways maintenance vehicles such
as gully tankers and jetters, for lifting heavy covers out of the way and to provide
clear access for safe, efficient cleaning and maintenance. Crews can clear more
gullies in the same period with greater safety, each operation taking only around
two minutes. | Swing
Lift Gas Bottle Crane.
Penny Hydraulics Swing Lift Gas Bottle Crane
is a safe and efficient solution for handling gas bottles. | Davit
Swing Lift Crane.
Light weight, robust construction and ease of use
combine to provide users with a versatile and effective load handling tool. | | | | Side
Mounted Lifts |  | Side
Lift
Penny Hydraulics Side Lift is designed for
3.5 to 17 tonne vehicles, Side Lift enables deliveries to be made directly onto
the kerbside. This dramatically reduces the space required to park and enables
more even distribution of the load, thereby reducing route planning time and risks
of axle overload. | Load
Lift Side Mounted
Penny Hydraulics Load Lift
is a lightweight and compact lifting platform for loading vans via either the
rear or side doors. | Load
Lift Rear Mounted
Penny Hydraulics Load Lift
is a lightweight and compact lifting platform for loading vans via either the
rear or side doors. | Single
Wheel Lift
Single Wheel Lift solves lifting and
re-treading problems associated with large vehicle tyres. It has a maximum working
load of 125kg with an optional MWL upgrade available. The roll-on/roll-off platform
and easy to operate locking device create the ideal tool for re-grooving tyres,
outside the vehicle, or inside, away from the elements. | Tail
Lift Easyloader EL 500
Penny Hydraulics Tail Lift Easyloader is a
lightweight and compact lifting platform for loading pickups, Luton and box vans. | Taillift
EL4X4
Penny Hydraulics Tail Lift Easyloader is a lightweight and compact
lifting platform for loading 4x4 pickups and Land Rovers. | Step
Lift 250
Penny Hydraulics Step Lift is a unique lifting platform that
replaces the rear step for loading most types of van. | | | | Rear
Mounted Lifts |  | Tail
Lift Easyloader EL 500
Penny
Hydraulics Tail Lift Easyloader is a lightweight and compact lifting platform
for loading pickups, Luton and box vans. |
Step
Lift 250
Penny Hydraulics Step
Lift is a unique lifting platform that replaces the rear step for loading most
types of van. | Load
Lift Rear Mounted
Penny Hydraulics
Load Lift is a lightweight and compact lifting platform for loading vans via either
the rear or side doors. | Single
Wheel Lift
Single
Wheel Lift solves lifting and re-treading problems associated with large vehicle
tyres. It has a maximum working load of 125kg with an optional MWL upgrade available.
The roll-on/roll-off platform and easy to operate locking device create the ideal
tool for re-grooving tyres, outside the vehicle, or inside, away from the elements. | | | | Winches |  | Winches
Penny
Hydraulics supplies a wide range of electrical and hydraulic winches from Warn,
Superwinch and Rule for all sorts of commercial vehicle to provide additional
load handling capabilities in service and delivery applications. Electric winches
from Penny Hydraulics are ideal and cost effective for all light and heavy duty
applications. Hydraulic winches from Penny Hydraulics offer controlled power and
are especially suited to arduous and heavy duty applications. | | | | |
|
|
Cellar
lifts for pubs & restaurants A choice of vertical
and sloping versions means that the Cellar Lift can be installed in virtually
any location. The Penny Hydraulics Bay Lift is ideal for handling loads between
two levels when the difference in height is less than one metre, for example at
loading bays in breweries and retail locations. The Penny Hydraulics Brewery Crane,
based on the popular Swing Lift crane, is designed for handling barrels, kegs
and other items on and off delivery vehicle. |  | Vertical
Cellar Lift Applications | | The
Penny Hydraulics Vertical Cellar Lift is the most popular choice in the range
for lifting, raising or hoisting kegs, casks or a double stack of crates weighing
up to 300kg, equivalent to a 54 gallon barrel, between the delivery point and
the cellar, which can be either in the basement of on the first floor, while occupying
minimum space. It is extremely adaptable for most situations and special versions
are available for installation in older, smaller or unusual buildings. A front
loading version can loaded and unloaded from the same direction to minimise the
space occupied by the equipment. A side loading version is ideal when there is
ample width but restricted depth in the opening, for example where skylights have
been replaced in the pavement overhead. | | |  | Sloping
Cellar Lift Applications | | The
Penny Hydraulics Sloping Cellar Lift is loads better for lifting, raising or hoisting
kegs, casks or a double stack of crates weighing up to 300kg, equivalent to a
54 gallon barrel, when a vertical lift is not practical between the delivery poimt
and cellar, for example where access is awkward or a concrete skid is in place.
The sloping lift can be installed at any angle or inclination from vertical to
horizontal for complete flexibility. Front and side loading versions provide even
greater versatility. | | |  | Case
Hoist Cellar Lifts | | The
Penny Hydraulics Cellar Lift Case Hoist is ideal for lifting, raising and hoisting
drink, food and non-food loads weighing up to 300kg between the cellar or store
and the bar area. The platform can be tailored to the precise size of the available
opening which means a Cellar Lift Case Hoist can be installed in almost any location.
A special Mini Case Hoist is designed to deliver items direct to the under-counter
or back-bar positions in busy pubs and bars where space may be extremely limited.
Single stack and mini-chain versions are also available for added versatility. | | |  | Bin
Lift | | Special versions
of the Penny Hydraulic Cellar Lift are available for handling a wide range of
loads up to 300kg including wheelie bins, waste containers and pub bottle skips.
Each unit is tailored to the specific requirements of the application, including
bespoke platform size, temporary ramps to simplify loading and unloading, and
installation of safety features such as interlocking gates. | | |  | Bay
Lift | | The Penny Hydraulics
Bay Lift is ideal for lifting, hoisting and handling kegs, casks and other loads
between different levels where the height difference is less than one metre such
as loading bays and docks. Versions are available with capacities from 250 to
2000kg which means the Bay Lift can safely handle kegs, casks, crates, pallets,
roll cages, sack barrows and many other loads. The unique cantilever action, folding
platform and self-contained hydraulics ensure the Bay Lift is compact and can
be installed in almost any indoor or outdoor location with a standard 240V, 20A
electrical supply. The platform folds up when not in use to minimise space utilisation,
clear the lower level working area and create a robust barrier at the edge of
the upper level for added security and safety. Simple hold to run controls ensure
the Bay Lift is easy and safe to use in any application and are identical to those
used in the Penny Hydraulics Cellar Lift for familiarity in licensed trade applications
when both devices are employed. | | | | | Brewery
Vehicle Applications |  | Brewery
Cranes
Medium duty electric cranes for pick-ups, drop sides, flat beds
and vans. | LoadLift
A
lightweight and compact lifting platform for loading vans via either the rear
or side doors. | Tri-pod
Medium
duty electric cranes for pick-ups, drop sides, flat beds and vans. | Miniloader
250
A lightweight, de-mountable,
250kg capacity electric crane for pick-ups, drop sides, flat beds and vans. | Miniloader
500
Medium duty electric cranes
for pick-ups, drop sides, flat beds and vans. | Foldaway
500
Compact, 500kg capacity electric
crane for pick-ups, drop sides and flat beds. | StepLift
A
unique lifting platform that replaces the rear step for loading most types of
van. | Easyloader
A lightweight and compact lifting platform for loading pickups, Luton and box
vans. | | | |  | Brewery
Vehicle Application Service | | Penny
Hydraulics offers a comprehensive set of service agreements to ensure that its
equipment continues to provide safe and trouble-free performance over extended
lifetimes with low overall cost of ownership. Service agreements from Penny Hydraulics
cover a minimum of one year and can include regular scheduled servicing and the
compulsory annual checks that users of load handling equipment are required to
complete under current legislation. | | | | | Special
Cellar Lift Applications |  | Bike
Lift
A lightweight and compact
platform lift for raising and lowering bicycles in a light well. The application
required a particle and safe approach to getting the cycles of members of staff
in and out of the basement storage area of this office block in London. | Mezz
Lift
A robust and versatile platform
lift to raise and lower goods safely and efficiently between two floors | Platform
Lift.
The Penny Hydraulics Platform Lift is ideal for lifting and
handling kegs, barrels and other loads between areas where the height difference
is less and one metre. The unique cantilever action and folding platform means
the Platform Lift can safely handle two 22 gallon kegs or barrels, a sack barrow
of cases or a roller truck of dry goods yet fold away when not in use to minimise
space utilisation. It is based on the same proven design as the popular vehicle-mounted
platform lift. Self-contained hydraulic units mean no sump is required and the
lift can be installed in almost any location, indoors or outside. Simple controls
promote easy and simple operation with familiarity for added safety. | | | |  | Interlocking
Gates for Cellar Lift | | Penny
Hydraulics Cellar Lift Interlocking Gates are installed whenever a risk assessment
for any item in the Penny Hydraulics Cellar Lift range identifies the need to
prevent access to working equipment or where unauthorised access and operation
of load handling equipment must be restricted. | | | |
| |
| |  | Goods
lifts for mezzanine floors | | The
Penny Hydraulics Mezz Lift (sometimes referred to as a mezzlift or mezzalift)
is a robust and versatile hydraulic platform lift for raising and lowering loads
up to 300kg safely and efficiently between two floors up to four metres apart
in factories, workshops, warehouses and stores. In busy areas the Mezz Lift is
ideal for handling loads between the ground floor and mezzanine store or workshop.
It helps organisations to comply with manual handling regulations and reduce the
risk of injury to employees and damage to goods or property. | | | | Platform
lifts for loading bays | | The
Penny Hydraulics Bay Lift is ideal for lifting, hoisting and handling loads between
different levels where the height difference is less and one metre such as loading
bays and docks. Versions are available with capacities from 250 to 2000kg which
means the Bay Lift can safely handle crates, pallets, roll cages, sack barrows
and many other loads. The unique cantilever action, folding platform and self-contained
hydraulics ensure the Bay Lift is compact and can be installed in almost any indoor
or outdoor location with a standard 240V, 20A electrical supply. The platform
folds up when not in use to minimise space utilisation, clear the lower level
working area and create a robust barrier at the edge of the upper level for added
security and safety. Simple hold to run controls ensure the Bay Lift is easy and
safe to use in any application. | | | |
Mining
& hydraulic services Penny Hydraulics has provided
a wide range of manufacturing and maintenance services for the mining industry
since the 1980s and has had an accredited quality system since 1994. The company
has an exclusive licence agreement with UK Coal covering small batch repair and
remanufacture of all hydraulic rams in powered roof supports manufactured by Joy
Mining. Its full range of hydraulic component repair services covers gas valves,
water valves and related equipment supplied by leading manufacturers including
Dosco, DBT and Hausherr. Mining products manufactured by Penny Hydraulics
include the popular Penny Duke Prop, Penny Gun Set Prop and Penny Power Prop which
are widely used for roof support throughout the worldwide mining industry and
independently approved by UK Coal. The company also manufactures a full range
of Desford Legs for a variety of applications. |  | Duke
Prop | | The
Penny Duke Prop is a self-contained hydraulic mining prop, unique in the European
market, designed for safe, consistent and reliable operation in arduous conditions.
It can be carried by one person and positioned and set in place quickly using
basic tools to provide full-caving, long-wall support and resistance to convergence.
The Penny Duke Prop is available in 15, 20 and 25 tonne yielding capacity versions.
Each unit is fully-enclosed for protection with separate valves for setting, release
and yield to promote safety, simplify operation and ensure consistent performance
and reliability. More than five million Duke Props have been sold and it is believed
to be the most widely used prop in the global mining industry. | | |  | Power
Prop | | The Penny Power
Prop provides safe, lightweight, temporary support in thicker seams from 2200mm
to 3500mm at 11 tonnes but can also operate in seams up to 4500mm at 10 tonnes.
The prop yields at 11 tonnes and is powered by hydraulic pressure from any available
oil or water source including the mine’s underground water supply or even
the fire-fighting range. A remote control facility ensures the Penny Power Prop
can be deployed while the operator is kept away from the immediate unsupported
roof area and is less at risk from falling material. Operating costs and waste
are reduced significantly because water rather than expensive oil is released
on to the floor when the prop is lowered. The use of water also eliminates risks
associated with oil such as slipping. | | | |  | Gun
Set Prop | | The Penny Gun Set
Prop offers a consistent yield characteristic up to 40 tonne loading and is designed
for applications where a higher support density is required. The use of the gun
set (also known as gunset) mechanism allows the prop to operate in the 600 to
2500mm setting range. A suitable source of hydraulic pressure and appropriate
hose system is required to power the Penny Gun Set Prop. Each unit is designed
and constructed for robust, durable and reliable operation. Each prop can be
supplied with a range of extensions, friction tops, channel tops, prong tops and
other spares to enable deployment in any mining and roof support application. | | | | | Desford
Legs |  | The
Maxi Desford Leg
The Maxi Desford
Leg is designed for heavy duty applications. It is available in a number of configurations
from 406-914mm closed height corresponding to 203-610mm stroke providing a full
range of capabilities in most locations. The legs have performance capabilities
from 50 tonnes at 138 bar (2000psi) to 125 tonnes at 345 bar (5000psi). A full
range of extensions is available. | The
Midi Desford Leg
The Midi Desford
Leg is designed for medium duty application and versatility where increased portability
may be required. The standard configuration has a 610mm closed height with 305mm
stroke. Working pressure of 345 bar (5000psi) delivers a rated pushing performance
of 70 tonnes. A selection of extensions and caps is available while an integrated
handle helps with carrying and positioning of the leg. | The
Mini Desford Leg
The Mini Desford
Leg is the lightest and smallest in the Penny Hydraulics range and offers similar
performance to the Midi model. It has a closed height of 610mm and 305mm stroke
which means it can be used in the smallest spaces inside the mine. Working pressure
of 345 bar (5000psi) delivers a rated pushing performance of 70 tonnes. A selection
of extensions and caps is available while an integrated handle helps with carrying
and positioning of the leg.
| | | | | Rams,
Valves, Hydrants & Specials |  | Rams
Penny
Hydraulics has the facility to repair, test or supply new...• all powered
roof support rams
• machine rams
• belt tensioners
• track
brakes | Valves
Penny
Hydraulics can service, repair and test...• gas relief valves
•
rotary selector valves
• pilot operated control valves
• fire
hydrants
• water valves
• non-return valves
• accumulators | Hydrants
& Specials
Penny Hydraulics has a comprehensive
in-house capability to provide...• Fabrication and machining
•
Winches supply, refurbishment and test
• Computer Aided Design
•
Project management
• Prototype development
• Third party assessments,
CE marking, statutory examinations and tests
| | | | | Rams,
Valves, Hydrants & Special Repair & Service | | Penny
Hydraulics’ comprehensive ram and valve refurbishment and maintenance service
is designed to extend and prolong the productive life of all types of hydraulic
and pneumatic equipment used in mining, process, engineering and other industries.
The company offers a fast and cost effective service with nationwide collection
and delivery of single items or batches to suit the customer’s operations.
A service exchange facility allows rams and valves to be replaced quickly to minimise
equipment downtime. The company’s dedicated maintenance facility can accommodate
rams of virtually any size, typically up to 3.25m (10 feet) long and 300mm (12
inch) bore. Each ram or valve is stripped and inspected on arrival by the company’s
team of specialist hydraulic engineers. Replacement parts including pistons, seals
and glands are machined or remanufactured on site to exacting specifications or
ordered from the original equipment manufacturer. Reassembled rams and valves
are tested and painted to a customer’s specification before final delivery. |
| |
|
Bespoke
lifting solutions Penny Hydraulics has designed and
manufactured special and modified versions of its vehicle mounted cranes and platform
lifts to provide novel solutions to the load handling requirements of customers
across a wide range of industries. Many of the company’s existing products
are the result of developing innovative products for customers which are then
manufactured for the wider market. In each case the common factor is to devise
an effective and appropriate load handling solution that meets the customer’s
specific requirement and which promotes safety by eliminating the need for manual
handling so that operators can comply with regulations and reduce the risk of
personal injury. Penny Hydraulics has devised special versions of the popular
Swing Lift vehicle mounted crane for use by the UK military and armed forces.
The company has also created a range of bespoke products based on its vehicle
mounted cranes, vehicle mounted platform lifts and specially manufactured hydraulic
rams. |  | Military
Solutions | | The
Penny Hydraulics Small Utility Vehicle Crane was designed to meet rigorous military
specification for use on firing ranges and other large estates. Two versions were
produced with maximum working loads of 150kg and 350kg. The design has since proved
popular with parks departments and golf clubs who need a small, compact and lightweight
crane that can be installed on smaller vehicles for handling a variety of loads. | | |  | Bespoke
Solutions | Exhibition Trailer
Penny Hydraulics designed, manufactured and installed the hydraulic systems
for this giant TV screen for the Monsters of Rock Festival. It has 330° rotation
and wind monitors to prevent toppling in adverse weather conditions. | | | |  | Davit
Portable Cranes | | Light weight,
robust construction and ease of use combine to provide users with a versatile
and effective load handling tool. | |
|
| |  | Vehicle
Mounted Tyrepress | Designed
and built in the UK to the latest industry standard the Penny
Hydraulics Tyre
Press range provides reliable, robust and efficient service
to the solid tyre
industry. 120 tonne presses are available either van
mounted, trailer mounted
or for static applications. A larger 150 tonne press
is also available. |
|
|
| | | Electrical
and hydraulic winches | | Penny
Hydraulics supplies a wide range of electrical and hydraulic winches from Warn,
Superwinch and Rule for all sorts of commercial vehicle to provide additional
load handling capabilities in service and delivery applications. Electric winches
from Penny Hydraulics are ideal and cost effective for all light and heavy duty
applications. Hydraulic winches from Penny Hydraulics offer controlled power and
are especially suited to arduous and heavy duty applications. | |
|
Mini
Cranes & Tracked cranes Penny Hydraulics supplies a wide
range of electrical and hydraulic winches from Warn, Superwinch and Rule for all
sorts of commercial vehicle to provide additional load handling capabilities in
service and delivery applications. Electric winches from Penny Hydraulics
are ideal and cost effective for all light and heavy duty applications. Hydraulic
winches from Penny Hydraulics offer controlled power and are especially suited
to arduous and heavy duty applications. |  | HS400/V12
tracked crane | | The
new HS400/V12 tracked crane is a revolution in the small plant market. At just
790mm wide and 1844mm high in its stowed position, the unit is small enough to
fit through a standard doorway, but punches well above its size with a lifting
capacity of 630kg. Ideal for confined sites and even indoor applications thanks
to its battery powered, low vibration chassis and compact, heavy duty crane, the
V12 Track Crane quite literally gets to places nothing else can reach. | | | | | TP2000/FV1200
tracked crane | | The
new TP2000/FV1200 tracked crane is set to transform the crane hire market. Its
rugged, tracked chassis can access gravel, sandy, muddy, snowy and uneven terrain
whilst its fully hydraulic crane can handle and manoeuvre loads of 1200kg and
has a reach of 4.3 metres. | | | | |
|
